Get gas quotes

Free calculator · TL-03

Gas level calculator: how much gas is left?

Weigh the cylinder on a bathroom or luggage scale, enter the tare weight stamped on its collar, and see the kilograms of gas left and how many hours that gives you.

Gas level calculatorTL-03 · weight and tare in, gas left out
TL-03

01The cylinder

Cylinder size
Stamped on the collar or the handle as TW or T. The figure here is only typical: use your stamp.

02Weigh it

With the regulator off.
A 3 panel heater on medium is about 0.18.
Gas left0
How full
-
Hours left at your use
-
A full cylinder weighs
-
A refill by weight adds
-

A planning estimate from rules of thumb, not a design. A registered gas practitioner checks the real appliances, pipe runs, ventilation and cylinder position before anything is fitted.

There is no window in a gas bottle, and a gauge on the regulator only shows pressure, which stays the same until the cylinder is nearly empty. Weighing is the one reliable way to know how much gas is left. Every cylinder has its empty weight, the tare, stamped into the collar or the handle: subtract it from what the scale reads and the rest is gas.

How to use it

  • Close the cylinder valve and take the regulator off.
  • Stand the cylinder upright on a bathroom scale on a hard floor, or hang a small one from a luggage scale.
  • Find the tare on the collar: look for TW, T or "tare" followed by a weight in kg. Enter it with the scale reading.
  • Enter how fast you use gas, from the runtime calculator, to see how many hours are left.

How the sum works

Gas left = scale reading − tare. How full = gas left ÷ the cylinder's size. A full cylinder weighs its tare plus its size (a 9 kg with a 10 kg tare weighs about 19 kg full), and a refill by weight adds the difference. That is also how to check a refill: weigh it when you get it home.

The tare figures this calculator fills in are only typical for steel cylinders. Two cylinders of the same size can differ by a kilogram or more, so always use the stamp on yours.

Other ways to check

  • Warm water: pour a jug of warm water down the side. The steel feels cool where there is liquid gas inside. It is quick, but only rough.
  • Stick on gauges change colour at the liquid level and work the same way.
  • Bulk tanks have a float gauge that reads a percentage. The LPG converter turns it into kilograms.

Frequently asked questions

How do I check how much gas is left in my cylinder?
Weigh it and subtract the tare weight stamped on the collar. A 9 kg cylinder with a 10 kg tare that weighs 15 kg has about 5 kg of gas left, a little over half.
What is the tare weight on a gas bottle?
The weight of the empty cylinder with its valve, stamped into the collar or the handle, usually marked TW or T. The test date is stamped there too: a cylinder past its test date should not be refilled until it is tested. See empty gas cylinders.
How much should a full 9 kg gas bottle weigh?
Its tare plus 9 kg, so usually about 18 to 20 kg. A full 48 kg cylinder weighs about 80 to 90 kg, which is why it is delivered rather than fetched.

More gas calculators

Free quote request

Get quotes for this

Fill it in the way a dealer would take an order or an installer would write a job card: what runs on gas, how many cylinders, or what the job is, and how to reach you. Gas dealers, installers and suppliers who work in your area quote you directly.

Gas order & quote requestFREE · NO OBLIGATION · LP-02 · 9 kg
Nº 089422

01The order

02How many (optional, it helps the quote)

DELIVERY TALLY · HOW MANY

A month
-
A week
-
Suggests
-
Estimate
-

A rule of thumb from published prices, not a quote.

03When

04Order list (optional)

  1. 01
  2. 02
Up to 12 lines: cylinders, refills, appliances, parts or work.
Needs and options

05Your details

Free and no obligation. By sending you agree that we may share your request with suitable gas dealers, installers and suppliers. See our privacy policy.

Get free gas quotes