The common 3 panel gas heater gives about 1.4 kW a panel, 4.2 kW on all three. That warms a study or an average lounge well, but a big open plan room with a high ceiling and sliding doors needs more than any portable heater gives. This calculator estimates the heat your room needs, so you can choose between a heater, two heaters or a flued fireplace before you ask for prices.
How to use it
- Measure the room's length and width, and choose the ceiling height. For open plan areas, include the whole space the heat spreads into.
- Be honest about how well it holds heat: no ceiling board, a wooden floor with gaps or a wall of glass all count as poorly.
- Choose your climate and how many hours a day and days a month you heat, for the gas use.
How the sum works
Volume = length × width × ceiling height. Heat needed = volume × 30, 40 or 55 watts per cubic metre for good, average or poor rooms, × 0.75 at the coast or × 1.25 in frosty inland towns. A 3 panel heater gives about 1.4 kW a panel, so the calculator picks the fewest panels that cover the heat, and an unflued heater turns all its gas into heat in the room: gas an hour = panels × 1.4 kW ÷ 13.8. Above 4.2 kW it suggests a flued fireplace, which loses about a quarter of its heat up the flue, and allows for that.
These are rule of thumb figures for comfort heating, not a heat loss design. They are close enough to choose between a portable heater and a fireplace.
Safety with indoor gas heaters
- Keep a window or door open a little: an unflued heater burns the room's oxygen and gives off moisture.
- Never use one in a bedroom, a bathroom or a caravan while people sleep.
- Keep the cylinder in the heater's own compartment and the regulator and hose in good order; see regulators and hoses.
- A gas or carbon monoxide detector is cheap protection; see gas leak detection.